Clamp Rack

By Lisa, 6 July, 2017

DIY clamp rack

My husband and I knocked this little project out in about 3 hours. This was something my hubby has been wanting to make for a while. This is a clamp rack, it will be used to hold all our clamps. It makes working on projects a little easier and not having to dig through the tool box for a certain clamp.

Materials & Tools:

  • Kreg Clamps
  • Drill
  • Miter Saw
  • Sander
  • Tape Measure
  • Kreg Pocket Hole Jig System
  • 1x8x96" Board
  • 1x4x96" Board
  • 1x3x96" Board
  • 1x2x96" Board
  • a piece of scrap for the 1/2x6"
  • 1 1/4" coarse-thread pocket hole screws
  • # 8 x 1 1/2" flat-head wood screws
  • #10 x 3" flat-head wood screws

For Directions on this project, please visit Build-Something-Customizable Clamp Rack.  Please note, we did not make this exact clamp rack. My husband sized it down to fit his needs.

Here is our project...

IMG_20161218_131907Attaching the cleat to the back.

IMG_20161218_131905IMG_20161218_131855Adding the rails to the spacers.

IMG_20161218_131845Finishing touches...

IMG_20161218_132909Finished product, ready to be installed.

IMG_20161218_132111IMG_20161218_141238And now because of this clamp rack, we are a little more organized and have more room in our tool box!

 

Categories

Comments